My router plane keeps losing its depth setting partway through a dado, usually right when i'm sneaking up on the final fit. Tried tightening the lock but it still creeps. Not sure if it's the iron collar or something with the…
I've been using shellac as a barrier coat before wipe on poly for a while now and it's worked great, but on this last piece it's going milky in a couple spots. I let the shellac dry overnight before applying the poly, so I don't…
Been using a marking knife to define the mortise walls before chopping and the difference in crispness is pretty noticeable. I used to just pencil the line and pare to it, always felt a little loose. Knife line gives the chisel…
I keep seeing people say you should use poplar or pine for beginner stuff but then other people say just use whatever is cheap at the hardware store. I'm about to build a small shelf and honestly have no idea if it matters or if…
Doing my third deck this summer and the homeowner wants composite with hidden fasteners. I've used them before and yeah the look is clean, but they add time and the clips can be fiddly on the first few rows near the house. Anyone…
I built a router circle jig out of scrap plywood and it works great but i'm trying to figure out the practical limits on radius size. Mine has a pivot pin about 3 inches from the bit center at minimum, and i can extend to about…
Tried to add some color to a cabinet door that already had danish oil on it and the gel stain just sat there, tacky and uneven for days. I thought the oil was fully cured but clearly not, or maybe it just doesn't play nice with…
Found a plan for a small side table I really like but it calls for red oak and that's way out of my budget right now. I've swapped species before on simpler stuff but this one has some narrower rails that I'm a little worried…
Been rethinking my cleat wall layout and not sure how tight to space the horizontal cleats for a row of heavier tools like hand planes and a track saw. Currently at 4 inch spacing but wondering if 3 inch would be worth the extra…
Running a surfacing pass on my spoilboard and getting small ridges where the passes overlap, like it's not cutting flat across the whole width. I'm using a 1 inch surfacing bit at about 40% stepover. Not sure if this is a…
Been trying to cut some curved cabinet parts and the blue tape plus CA glue method isn't holding great on pieces with a lot of inside corners. Thinking it's a spoilboard flatness issue but not totally sure. Anyone using a…
Been thinking about this lately, when i'm carving against the grain i tend to ride a slightly steeper bevel and it feels better but i can't tell if that's real or just in my head. Anyone else notice this or am i overthinking it…
Working on a mortise and tenon chair with four legs and stretchers, and my hide glue is gelling before I can get everything seated. I'm mixing at roughly 1:1 and keeping it around 140F but a complex assembly just outruns me. Does…
Been working on this entry bench for about a month and honestly couldn't be happier with how it turned out. Used some leftover pine and added a shelf underneath for shoes, which was a last minute idea that I think really made it.…
Got an older Craftsman contractor saw and the riving knife from a newer model supposedly fits but I can't find anyone who's actually confirmed it. Running without one makes me genuinely uncomfortable, splitter and pawls just…
Been using my miter saw for pretty much everything but it obviously can't handle full sheets. Thinking about grabbing a track saw to replace my table saw workflow for plywood but not sure if its worth the cost over just clamping…
Been running a 40T combo blade on my table saw for a few months now and honestly the difference from the stock blade was bigger than i expected. Rips are cleaner, crosscuts don't need as much cleanup, and it hasn't burned oak…
Been running a little 10x18 mini lathe for about two years and I keep hitting the capacity limit every time I try a bigger bowl blank. I want to step up but there's so many options in the 12x21 and 14x20 range that I'm going in…
I keep second guessing myself at the lumber yard because i don't know if i should grab pine or something else for a small side table. Everyone online says hardwood is better but pine is way cheaper and easier to find. Does it…
Got a big sheet goods project coming up and debating whether to just use the track saw for everything or drag out the table saw for rips. I usually default to the track saw for 4x8s cause setting up outfeed support is a pain but…