This hits different because you're showing the finished piece costs way less than store prices, but I'm curious about one thing: how does the plywood edge detail actually read once it's stained and sealed? That's the one spot…
I created a video showing the construction of a Fliptop Tool Stand I built for my planer and oscillating spindle sander. My shop, like so many others is inside a small two car garage with some days feels like a one car garage.…
The floating platform with rope connections sounds beautiful, but I'm wondering about real-world durability. How long before rope deteriorates outdoors, especially if it gets wet regularly? Are people replacing them annually, or…
Lift-off panels sound smart for maintenance, but I'm curious about the design underneath. With a bench sitting on a patio, how's the airflow and drainage handled? Does water pool between the base and the storage box, or is there…
These benches are designed to match a farmhouse table, which makes me curious about one thing: how are the legs proportioned relative to the top? Rustic design often means thicker, chunkier pieces, but there's a balance point…
I'm looking at this multifunction setup and curious what wood folks are using for something this size that rolls around. Are people going with construction lumber for the frame and something nicer for the top, or just building…
An antique sled's got curved runners and a rigid frame, which seems like the kind of thing where small variations in runner symmetry or seating would show up fast once it's loaded and sliding. Are you planning to jig up the…
The Victorian Gothic inspiration caught my eye. Before building this, I'm wondering how the proportions read in a contemporary room. Does the architectural detailing feel intentional or fussy depending on where it's placed?…
I have two nice pieces of walnut that I plan to use to make a side table. Both pieces are variegated in color – mostly dark in the middle and lighter on the outsides. Neither piece is wide enough to use alone for the table top.…
With desk organizers, I'm always wondering how much depth actually works. Are you imagining something shallow for pens and notepads, or deep enough to stash cables and chargers too? And does the layout assume a standard desk…
A pocket-hole jig appeals to me partly because it's the kind of fixture you cut once and run reliably dozens of times. What makes this design hold its accuracy - is it the fence geometry, the guide bushing fit, or something about…
The plan mentions turnbuckles holding the jig to the table. I'm wondering how that actually locks down during a cut - does the clamp pressure stay consistent as you feed the work, or do you need to re-tension between circles? And…
Oval turned handles are interesting because they sit differently in your hand than a round spindle. Are you drawn to them mainly for the grip feel, or is there something about the look that appeals to you? I'm wondering if…
Looking at a toy box that's meant to look good sitting out. I'm wondering if you'd carve a design into the lid itself or if that's asking for trouble with a piece kids will actually use. Does solid wood hold detail better than…
Cedar fence pickets are cheap and quick, but how are you handling the joints if this is truly minimal? Butt everything with pocket holes, or is there actual joinery involved? seems like it'd either be super fast or turn into a…
Love this project idea. For a loop that's taking repeated car impacts, how are you thinking about the track's flex and support underneath? With reclaimed pallet wood, are you planning thicker sections on the loop itself, or…
Curious how folks who skip the lathe handle the wall thickness on something like this. I'm used to hollowing on the lathe, so the idea of chiseling out the inside by hand sounds tedious. Are you going for thinner walls or keeping…
All plywood construction makes me curious about finish choices here. Are people planning to paint these, or doing a stain and poly approach? Plywood edges can be tricky either way. Wondering if anyone's built this and whether the…
This looks like a perfect intro project. I'm curious though - with the picket width, do you end up with an entrance hole that works for multiple bird types, or is it sized for something specific? Wondering if kids could drill…
I drew a bench to build from a scrap pile: three 8 ft studs (2x4), one 1x4, one 3/4 ply offcut. No bought hardware, screws only, longest part 40 in. Seat 17 high, 16.5 deep, legs splayed 8 degrees. Full sheet, parts table, cut…