Upgraded from my mini to a Rikon 70-220 midi last week and honestly the extra swing is already making me rethink every blank i own. First bowl attempt on it was a fat chunk of walnut and man the torque difference is night and…
Working on a mortise and tenon stool and my shop gets down to about 55F this time of year. I've been warming the joints with a heat gun before assembly but i'm still feeling rushed. Anyone doing anything clever to extend the open…
Trying to iron on edge banding to a small MDF shelf and the corners keep lifting no matter how much pressure i put on them. I'm using a regular clothes iron on medium heat and just going slow over it. Do I need a special roller…
Been going back and forth on this for my next build and want some real world opinions. I know quarter sawn is more stable and honestly the ray fleck on oak is gorgeous, but the price difference at my local yard is pretty…
I know most guys take it off immediately but I've been leaving mine on for rip cuts and it honestly doesn't bother me as much as I expected. The dust port on mine is useless though so i removed that part. Curious if anyone has…
Been thinking about this a lot lately carving a relief panel in basswood. Going with the grain feels smooth but even a slight angle against it and the gouge wants to dive or tear. I know in theory you follow the grain but in…
Tried ironing on edge banding to a shelf I built and the corners keep lifting no matter how much pressure i put on. I'm using a regular clothes iron, maybe that's the problem? Already pressed it down twice and it looks fine for a…
Been using the blue tape and CA glue method for holding down thin plywood on my spoilboard and it works great for small stuff, but anything over like 18 inches tends to lift a corner mid cut and ruins the piece. Running a pretty…
Picked up a dresser at an estate sale and started stripping it, pretty sure there's something nice under all that old paint. I've got it down to bare wood in a few spots and the grain looks really tight and dark, could be walnut…
Pulled off the top layer of paint on an old dresser I picked up at an estate sale and turns out there's walnut underneath. Kind of changes my whole plan now, not sure if i should keep stripping and do a clear finish or try to…
Got brave last night and broke out the skew for the first time on a cherry spindle. Caught it twice in about 20 minutes and sent a chunk flying across the shop. I know this tool has a learning curve but man, anyone have a good…
Been carving spoons off and on for a few months now and i keep getting these little fuzz tears on the bowl interior no matter how sharp i go. Wondering if i'm just fighting the grain the wrong direction or if that's kinda normal…
Been running a harbor freight mini for about two years and i'm just constantly fighting the limitations, especially on bigger bowl blanks. Looking at the Jet 1221VS and the Rikon 70-105 but honestly the specs blur together after…
Been using my table saw for sheet goods forever but breaking down 4x8s solo is getting old. A track saw seems way faster for that first rough cut but i'm not sure it justifies the price if you already own a decent table saw.…
Been going back and forth on this for a while now. I use a router plane to flatten the bottom of dadoes but sometimes wonder if careful paring with a sharp chisel would be just as consistent. Anyone settled on one approach over…
Running a 1/4 inch upcut spiral in 3/4 Baltic birch and getting some nasty fuzz on the top surface, especially on pocket cuts. I'm at 18000 RPM and around 60 ipm feed rate with a 0.1 inch depth per pass. Anyone dialed this in…
Picked up a beat up dresser at an estate sale for almost nothing, and after stripping the top I found what looks like genuine walnut under about three layers of paint. Now i'm debating whether to strip the whole thing or just the…
Been thinking about building a DIY track guide for my circular saw instead of buying a Festool setup i cant afford. I made a simple one from scrap MDF before and it helped a lot, but wondering if there's a better way to do it.…
Been running a Harbor Freight mini lathe for about two years and I keep hitting its limits, mostly on bowl blanks wider than 8 inches. Looking at the Jet 1221VS and the Rikon 70-105 but honestly the specs start blurring together…
Had another close call at the shop today and it reminded me that a lot of people still reach behind or over the blade to clear offcuts while it's spinning. Get a push stick or a scrap piece of wood and knock it clear from the…