Curious how folks who skip the lathe handle the wall thickness on something like this. I'm used to hollowing on the lathe, so the idea of chiseling out the inside by hand sounds tedious. Are you going for thinner walls or keeping…
This looks like a perfect intro project. I'm curious though - with the picket width, do you end up with an entrance hole that works for multiple bird types, or is it sized for something specific? Wondering if kids could drill…
This 1650s stool has that chip carved frieze pattern on the apron. I love the idea of hand carving details like that with kids - feels more personal than just cutting shapes. For someone starting out with carving, would you…
Looking at these plans for a client who wants something simple and durable. With 2x6 treated lumber, I'm wondering how much movement you typically see through a winter cycle, especially if water pools on the top. Are people…
Cut some cherry boards last week and left a test piece on my bench near the window for a few days. The sun hit part of it and now there's a really visible line where the color changed, almost like a tan line on the wood. Is this…
Got brave last night and broke out the skew for the first time on a cherry spindle. Caught it twice in about 20 minutes and sent a chunk flying across the shop. I know this tool has a learning curve but man, anyone have a good…
Been rethinking my cleat wall layout and not sure how tight to space the horizontal cleats for a row of heavier tools like hand planes and a track saw. Currently at 4 inch spacing but wondering if 3 inch would be worth the extra…
Been working on this entry bench for about a month and honestly couldn't be happier with how it turned out. Used some leftover pine and added a shelf underneath for shoes, which was a last minute idea that I think really made it.…
Been using my miter saw for pretty much everything but it obviously can't handle full sheets. Thinking about grabbing a track saw to replace my table saw workflow for plywood but not sure if its worth the cost over just clamping…
I keep second guessing myself at the lumber yard because i don't know if i should grab pine or something else for a small side table. Everyone online says hardwood is better but pine is way cheaper and easier to find. Does it…
Built a circle cutting jig for the router and the pivot pin keeps shifting mid cut, especially on bigger diameter circles. I've got it set in a 1/4 inch hole drilled through the base but there's just enough slop that the radius…
been running my shapeoko for about 6 months and i just noticed my pocket depths are off by maybe 0.4mm across the bed. figuring its time to resurface the spoilboard again but curious how often you all redo yours... every few…
Picked up a nice 8/4 walnut slab last spring and stickered it in the garage thinking i was being patient. Came back after a hot stretch and theres a check running almost a third of the way down. Did i skip sealing the end grain…
Been playing with the camber on my no 4 iron and i think i went a touch heavy, leaves faint tracks on wider panels unless i really feather the passes. Curious what others settle on for a smoother, i've heard anything from a…
This looks really practical for keeping everything charged and in reach. Quick question though - are you routing out the back of that shelf to run the cord, or is the outlet setup sitting on top? I'm always paranoid about…
Looking at this plan, I'm wondering about tolerance on the opening for the dishwasher itself. The old cabinet being odd-shaped makes me think there might have been some wiggle room built in, but with a fresh build you'd probably…
Hi All, We own a historic home and I have missing molding in one of the closets. I'd love to replace it with but I'm uncertain what type of wood species we have. It's been refinished in the last 20 years and when we sanded it had…
Put in about 300 stainless screws on my last deck build and maybe a dozen of them have backed out slightly over the winter, boards are still tight but the screw heads are sitting proud now. I used composite-rated screws and…
We finally tried the scroll saw together and cut out some simple ornament shapes from 1/4" pine. She picked a star and a little tree and honestly she was more patient than me waiting for the blade to do its thing. Painted them up…
Running my surfacing bit across the spoilboard and getting these tiny ridges where each pass overlaps. Stepover is at 40% right now, not sure if I should push it down lower or if this is a feeds and speeds thing. Anyone dialed…