Finally getting around to lighting the underside of my wall cabinet shelf above the bench and wondering if regular LED strip tape is good enough or if i should go with something brighter. The cheap stuff always seems dim once its actually installed. Anyone running specific lumens or strip types they like for close up work?
What's the color temp you're going for, warm or daylight? makes a bigger difference than lumens for close work i think.
Honestly the color temp point is real but i'd still lean toward getting more lumens than you think you need. Once you mount the strip and it's bouncing off whatever surface is around it, you lose more than expected. I went with a 4000K daylight strip on a shelf setup and wished i'd doubled the density, the single row stuff just doesn't cut it for detail work. Look for strips rated at least 300+ lumens per foot if you're doing close hand work, and if you can go with a double density strip (sometimes labeled 2x or 60 LEDs per meter vs 30) that's the move. Diffuser channels help too if you're getting hot spots.
@sawdustsam Double density strips are the right call, and i'd add: get the ones with a CRI of 90+ not just high lumens. For close bench work, color accuracy matters or you'll miss things like grain tearout and finish flaws.
@nguyentools wrote:
@sawdustsam Double density strips are the right call, and i'd add: get the ones with a CRI of 90+ not just high lumens. For close bench work, color accuracy matters or you'll miss things like grain tearout and finish flaws.
CRI 90+ is a good point and honestly that's one i'd missed when i set up my own bench light. One other angle worth considering: if you have any flexibility in where the cabinet sits or how deep the shelf is, sometimes just angling the strip slightly toward the work surface instead of pointing straight down makes a noticeable difference without needing to upgrade the strip itself. Mounting them in a channel with a frosted diffuser helps spread the light more evenly too, which for detail work is almost as important as raw brightness.
Sign in to join this discussion.
Sign in to reply