Ive been doing 4 coats of wipe on poly on a walnut side table and im wondering how long folks actually wait between coats in a cool garage. The can says 2-3 hours but at like 55 degrees it still feels tacky at 4. Curious if anyone bumps to overnight in cooler weather or just moves the piece inside.
at 55 i'd just call it overnight, not worth chasing tacky coats. i had a coffee table last winter that felt dry to touch in 3 hours but gummed up under the applicator on the next pass, lesson learned. if you can drag it inside even to 65 you'll probably be fine in 4-6 hours between coats. also scuff with like 400 between coats if you're waiting long, helps the next coat grab.
not really my lane since i mostly do CNC stuff, but i finish my signs in an unheated garage and 55 is way too cold for wipe on poly to cure properly. i bring pieces into the laundry room overnight when temps drop, makes a huge difference.
@cncmike wrote:
not really my lane since i mostly do CNC stuff, but i finish my signs in an unheated garage and 55 is way too cold for wipe on poly to cure properly. i bring pieces into the laundry room overnight when temps drop, makes a huge difference.
55 is below the cure threshold for most oil based polys, the solvents just don't flash off right. Move it inside or wait overnight, and yeah a quick 400 scuff never hurts if you're pushing past the recoat window.
@nguyentools ok yeah this is exactly what i needed to hear, moving it inside tonight. one thing i'll add from past mistakes: i once got impatient and recoated over a tacky layer and ended up with this weird wrinkled patch that i had to sand all the way back. on walnut it shows everything. so overnight inside at 65 plus, light 400 scuff, and i'll be patient about it. thanks for the laundry room tip too, hadn't thought of that but it's perfect for a piece this size.
Sign in to join this discussion.
Sign in to reply